Become a fan 
Become a fan 
SERVICES
DESIGN VALIDATION
- Study of Customer need, design intent and application, system requirement & technical specifications.
- Visit to site. Collecting design inputs and drawings like architectural plans, reflecting ceiling plans, structural drawings and drawing related to utility areas.
- Calculations of cooling loads and air flow requirements for each control zone. Psychrometric analysis for critical areas, calculation of reheat figure, selections of apparatus dew points and finalizing air treatment process.
- Verification of systems pumping head, fan static pressure requirement, electrical load, water and air filtration need.
- Based on above, selection of equipments of desired rating as per technical specifications.
- Coordination with architecture and other utilities and preparation of shop and layout drawings.
- Preparation of air and water flow schematics, with necessary valves, strainers and control valves details and instrumentation input.
- Providing inputs for utilities / work to be provided by others out side battery limits.
- Obtaining consultants / architects approval and release of drawings for site work.
- Generation of material request as per approval and release if drawing for site work.
- Calculation of material as per purchase specification .
SITE EXECUTION
The team comprises of a project manager and an engineer at site assisted by supervisors and associates handling sheet metal ducting, thermal and acoustic insulation, piping, equipment installation, instrumentation and electrical work.
Activity chart indicating time frame and various constraints / hold points are made right in the beginning. The project progress is monitored with respect to man / material need and appropriate action is taken to meet dead lines
There are two separate teams. While the major ones handles physical site execution and other for dry run, commissioning and testing & balancing.
COMMI SSIONING, TESTING, BALANCING
- inspection for physical completeness.
- Electrical work inspection including Megger test for panels, cables, motors & earthing continuity.
- Energizing of panels.
- Dry run to check for correct rotation.
- System commissioning
- Air and water balancing.
- Validation of system for design parameters.
- Submission of handing over documents and as built drawings.